LAMINATOR CONTROLS
A | On/off switch | F | Pouch / document entry slot |
|
|
|
|
B | Standby button & LED | G | Entry support shelf |
|
|
|
|
C | Pouch selection buttons | H | Pouch / document exit |
| (3, 4, 5, 7 Mil.) |
|
|
|
|
|
|
D | Reverse button & LED | I | Cooling system vents |
|
|
|
|
E | Carry handles |
|
|
|
|
|
|
FEATURES & TIPS
When switched on, the machine performs a
‘Safe Start’ function
When switched on, the machine has a default ‘Safe 3 Mil Start’ function which starts to
setting. You may select other temperature settings as required.
‘Reverse’ function
To eject the laminating pouch during use, press and hold down the reverse button until the pouch has ejected from the machine.
‘Power Save’ function
If the machine is not active for 60 minutes, the ‘Power Save’ function will place the machine into standby mode. To operate the machine, press the ‘standby’ button.
SETTING UP THE LAMINATOR
1. Ensure the machine is on a stable surface. Check that there is enough clear space behind the machine to allow items to pass through freely.
2. Connect the supplied power cord to the machine.
•Always put the item to be laminated into the ap- propriate sized pouch.
•This machine does not need a carrier to laminate.
•Always test laminate with a similar size and thick- ness before final process.
•If required, trim excess material from around the item after lamination and cooling.
•For best results, use Fellowes® brand laminating pouches: Enhance 3 Mil, Capture 5 Mil, Protect 7 Mil.
•When working with different pouch thickness’ (tem- perature settings) it is recommended to start first with the thinnest pouches.
3. Plug the machine in to an easily accessible main socket.
5
403843_2_NA_Neptune_EFS_v6.2.indd 5
12/08/2009 16:21:21
