Installation and connection instructions
Inlet Hose Connection
A pressure hose of 1.35m in length is supplied.
If a longer inflow hose is required, only a
–Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without
–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with
Important! Never cut into pieces in order to extend the hoses!
3 | Sealing rings are supplied either in the plastic |
| nuts of the hose screw connection or in the |
enclosed pack. Do not use other seals!
0 1. Connect the hose with the angled connection to the machine.
Important!
– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.
– Only tighten the hose screw connection by hand.
2. Connect the hose with the straight connection to a water tap with a screw thread R 3/4 (inches) Important! Only tighten the screw connection by hand.
3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.
45
