What to do if, Trouble Shooting | Electrolux 74640 specification

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to re- pair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code E10, E20 or E40 is shown in

the multi-display, you may be able to remedy the fault yourself (see the Faults table below).

After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The house fuse has blown.	Replace the fuse.

	The washing machine	The door is not correctly	Close the door; The lock must
	does not work.	The door is not correctly	Close the door; The lock must
	does not work.	closed.	engage audibly.
		closed.	engage audibly.
		START/PAUSE button not	Keep the START/PAUSE but-
		START/PAUSE button not	ton pressed until the pro-
		pressed long enough.	ton pressed until the pro-
		pressed long enough.	gramme begins.
			gramme begins.

			Cancel the child safety fea-
	Door cannot be closed.	The child safety feature is set	ture (see Section "Child
			Safety Feature“).
	The fault code E40	The door is not correctly	Close the door correctly.
	appears. The display	The door is not correctly	Close the door correctly.
	appears. The display	closed.	Start the programme again.
	MAIN WASH flashes.	closed.	Start the programme again.
	MAIN WASH flashes.

32

Image 32

Electrolux 74640 manual What to do if, Trouble Shooting

Contents

ÖKO-LAVAMAT 74640 update Dear Customer Pages of this instruction bookFuture owners Appliance Contents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General Safety When disposing of the washing machine DisposalEnvironmental tips Packaging Detergent dispenser drawer Description of the ApplianceFront view Control panel Programme selector Main wash cycle for delicates at 30 C or 40 C Wool P hand wash Ment products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washing What does Update mean? Consumption data Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washing Selecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmly If using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agent Pressed, the door is not properly closed If the delay timer has been setStarting the washing programme Multi-display Washing Programme ProgressProgramme progress display Selecting the programme options Changing or cancelling the wash programmeChanging the washing programme Washing cycle is complete/Removing the washing Programme Tables Washing Separate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main door Cleaning the drain pump Before cleaning the drain pump Trouble Shooting What to do if Water tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washing Carrying out an emergency emptying Have a flat container on hand to catch the water When the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ To set the additional rinse function Child Safety Feature Cancelling the child safety featureWashing programme can be Started Installation and connection instructions Installation Safety Precautions Remove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap C Installation-Site preparation Installation on a Suspended Floor Levelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water connection Water pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG