Preparing the wash cycle 29

Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme.

Any fabric softener or starching additives must be poured into the compartment

marked before starting the wash programme.

Follow the product manufacturers’ recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer.

Quantity of detergent to be used

The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.

Follow the product manufacturers’ instructions on quantities to use.

Use less detergent if:

you are washing a small load,

the laundry is lightly soiled,

large amounts of foam form during washing.

For the stain treatment before the washing cycle, follow the product manufacturers’ instructions on detergent quantities. If you use any specific product to remove the stains, you must start the washing immediately .

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.

Note: A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft).

 

 

Degrees of water hardness

Level

Characteristic

German

French

 

 

°dH

°T.H.

1

soft

0-7

0-15

2

medium

8-14

16-25

3

hard

15-21

26-37

4

very hard

> 21

> 37

Page 29
Image 29
Electrolux 74950 Quantity of detergent to be used, Degrees of water hardness, Marked before starting the wash programme