Electrolux 77000 user manual USE of the Appliance, Functions, Setting mode

10Use of the appliance

Option button	Multitab	Extra-Hygiene
Press three times	ACTIVATED	ACTIVATED
Press four times	DEACTIVATED	DEACTIVATED

Functions

Multitab

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function. Refer to 'Multitab function'.

Extra-Hygiene

This function gives better results for the hygiene. During the rinsing phase, the temperature stays at 70°C for 10 to 14 minutes.

Setting mode

The appliance must be in setting mode for these operations:

•To set and start a washing programme.

•To set and start a delay start.

•To adjust electronically the level of the water softener.

•To deactivate or activate the rinse aid dispenser (only with the multitab function on).

Activate the appliance. The appliance is in setting mode when:

•All the programme indicators come on.

•The display shows two horizontal status bars.

Activate the appliance. The appliance is not in setting mode when:

•Only one programme indicator comes on.

•The display shows the time of the washing programme or of the delay start.

–It is necessary to cancel the programme or the delay start to go back to the setting mode. Refer to 'Select and start a washing programme'.

USE OF THE APPLIANCE

1.Be sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener.

2.Fill the salt container with dishwasher salt.

3.Fill the rinse aid dispenser with rinse aid.

4.Load cutlery and dishes into the appliance.

5.Set the correct washing programme for the type of load and soil.

6.Fill the detergent dispenser with the correct quantity of detergent.

7.Start the washing programme.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function').