Installation and connection instructions
Levelling the appliance
3 | Self adjusting foot: The rear foot of your washing machine is designed |
| like a spring leg. This makes the machine very stable even at high spin |
speeds.
If the washing machine is still not stable during spinning, proceed as follows:
01. Set the three adjustable feet to
the nominal value of 10 mm. Use the supplied spanner.
If the self adjusting foot does not reach the floor:
2. Manually extend the self adjusting foot (rear left) to the required length.
3. Check the appliance is level using a spirit level.
Important! Never use strips or shims of wood or cardboard etc. to compensate for any uneven- ness in the floor. Always use the adjustable feet.
48
