14 | What to do if… |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Problem |
| Possible cause |
| Solution |
|
|
|
|
|
|
| Water flows on the |
| The melting water outlet does |
| Attach the melting water outlet |
| ground. |
| not flow in the evaporative tray |
| to the evaporative tray. |
|
|
| above the compressor. |
|
|
|
|
|
|
|
|
| There is too much frost |
| Products are not wrapped prop- |
| Wrap the products better. |
| and ice. |
| erly. |
|
|
|
|
|
|
|
|
|
|
| The door is not closed correctly. |
| Refer to "Closing the door". |
|
|
|
|
|
|
|
|
| The Temperature regulator may |
| Set a higher temperature. |
|
|
| be set incorrectly. |
|
|
|
|
|
|
|
|
| The temperature in the |
| The door is not closed correctly. |
| Refer to "Closing the door". |
| appliance is too high. |
|
|
|
|
|
|
|
|
|
|
|
|
| The product temperature is too |
| Let the product temperature de- |
|
|
| high. |
| crease to room temperature be- |
|
|
|
|
| fore storage. |
|
|
|
|
|
|
|
|
| Many products are stored at |
| Store less products at the same |
|
|
| the same time. |
| time. |
|
|
|
|
|
|
| The temperature in the |
| There is no cold air circulation |
| Make sure that there is cold air |
| refrigeration is too high. |
| in the appliance. |
| circulation in the appliance. |
|
|
|
|
|
|
| The temperature in the |
| Products are too near to each |
| Store products so that there is |
| freezer is too high. |
| other. |
| cold air circulation. |
|
|
|
|
|
|
| The appliance does not |
| The appliance is switched off. |
| Switch on the appliance. |
| operate. |
|
|
|
|
|
|
|
|
|
|
|
|
| The mains plug is not connec- |
| Connect the mains plug to the |
|
|
| ted to the mains socket correct- |
| mains socket correctly. |
|
|
| ly. |
|
|
|
|
|
|
|
|
|
|
| The appliance has no power. |
| Connect a different electrical ap- |
|
|
| There is no voltage in the mains |
| pliance to the mains socket. Con- |
|
|
| socket. |
| tact a qualified electrician. |
|
|
|
|
|
|
| The lamp does not work. |
| The lamp is in |
| Close and open the door. |
|
|
|
|
|
|
|
|
| The lamp is defective. |
| Refer to "Replacing the lamp". |
|
|
|
|
|
|
As much as the advice does not lead to result, call the nearest
Replacing the lamp
1. | Disconnect the appliance. |
|
|
2. | Push the movable part to unhook the |
|
|
| lamp cover (1). | 1 | 2 |
3. | Remove the lamp cover (2). | ||
4. | Replace the lamp with one of the same |
|
|
| power and specifically designed for do- |
|
|
| mestic appliances only. |
|
|
5.Install the lamp cover.
6.Connect the appliance.
7.Open the door. Make sure that the lamp comes on.
