Description of the Hob, Installation | Electrolux 95752 G manual

Description of the Hob

1

2

4

2

3

2

5

1.Hob Top

2.Semi-rapid Burners

3.Auxiliary Burner

4.Rapid Burner

5.Control knobs

INSTALLATION

Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

5

Image 5

Electrolux 95752 G manual Description of the Hob, Installation

Contents

Instruction Booklet 95752 G Gas hob Installation Important Safety InformationChild Safety During Use Environmental Information Service Contents Description of the Hob Installation Hob burners Operation Hob Top Maintenance and CleaningPan Supports Burners Something Not Working? Symptom Solution Customer Care Service and Spare Parts European Guarantee Guarantee Conditions Engineers technical data Instructions for the Installer Location Important safety requirements Gas Connection Installation Building over a cupboard or drawer BuildingCut Out Size Building over a kitchen unit with door Fitting the hob to the worktop This HOB Must be Earthed Electrical connections Permanent Connection Wiring diagramReplacement of the cable Preliminary Electrical Systems Check Fault Finding Earth Continuity Check Ignitor does not spark Ignition System / Gas Ignition Commissioning Pressure Testing Method To adjust the gas rate From the Electrolux Group. The world’s No.1 choice