ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS

(and Optional Electric or Gas Cooktop Combination)

5. Cabinet Installation

IMPORTANT

Do not lift the oven by the door handle.

1.Unpack the wall oven. Remove the bottom trim taped on the oven side panel.

2.Find the 2 anti-tip mounting screws included in the literature package.

3.Insert the oven into the cabinet opening. Slide oven inward leaving 1½" (3.8 cm) clearance between the oven and front of cabinet (see Figure 5).

4.Pull the armored cable through the hole for it in the cabinet and toward the junction box while moving the appliance inward.

5.Push the oven in and against the cabinet.

1½" (3.8 cm) clearance between unit

Figure 5

6. Install the Anti-tip Mounting Screws

The wall oven can tip when the door is open. The anti-tip mounting screws supplied with the wall oven must be installed to prevent tipping of the wall oven and injury to persons.

A. The mounting holes in the side trims may be used as a template to locate the appliance mounting screw holes (see figure 6).

B. Use the two screws supplied to fix the appliance to the cabinet.

Figure 6

7.Install the Bottom Trim

Place the top of the bottom trim over the side trim tabs on each side of the oven below the oven door and fix it using the 2 screws supplied in the mounting holes located on each side trim below the oven frame (see Figure 7).

Screws

 

supplied

Bottom Trim

 

Figure 7

6

Page 6
Image 6
Electrolux B Cabinet Installation, Do not lift the oven by the door handle, Install the Anti-tip Mounting Screws