Electrolux C 7 18 41-4i installation instructions Energy Saving Tips

Models: C 7 18 41-4i

1 28
Download 28 pages 4.92 Kb
Page 13
Image 13
Energy Saving Tips

• The appliance must be dry before it is switched back on.

Warning!

• Ethereal oils and organic solvents can attack plastic parts, e.g.

lemon juice or the juice from orange peel,

butyric acid;

cleansers which contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

• Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added.

1. Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well covered.

2. Switch the appliance off and remove the plug from the mains, or switch off.

3. Clean the appliance and the inte- rior accessories with lukewarm water and with a little bicarbonate of soda added (5ml to 0,5 litre of water).

4. Dry the appliance thoroughly.

5. Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the drain cleaning tool included with the appliance.

D037

6.When everything is dry switch the appliance back on.

Manual backgroundEnergy Saving Tips

Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

Do not place warm foods into the appliance. Allow warm foods to cool first.

Do not leave the door open any longer than necessary.

13

Page 13
Image 13
Electrolux C 7 18 41-4i installation instructions Energy Saving Tips