Fix cover (C) on guide (A) until it clips into place.
A
C
PR33
Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni- ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
At the end of installation/adjusting, it is necessary to check if the door of the furniture closes properly.
Should adjustment of the furniture door be necessary, use the clearance of slots.
| 8mm |
| A |
PR167 | B |
|
PR168 |
23
