HP 8000s manual Declares that the product, Conforms to the following product specifications

Legal information

DECLARATION OF CONFORMITY

according to ISO/IEC Guide 22 and EN 45014

Supplier’s name:	Hewlett-Packard Company
Supplier’s address:	Avda. Graells, 501
	08174 Sant Cugat del Vallès
	Barcelona, Spain

declares that the product

Regulatory Model (3):	BCLAA-0502 and BCLAA-0602
Product family:	HP Designjet 8000s Printer series and HP Designjet 8000s Take-up Reel Kit
Product options:	All

conforms to the following product specifications

Safety:	IEC 60950-1:2001 / EN 60950–1:2001
EMC:	CISPR 22:1997 +A1:2000 +A2:2002 / EN 55022:98 +A1:2000 +A2:2003 Class A
	(1)(3)
	EN 55024:1998 +A1:2001 +A2:2003
	EN 61000-3-2:2000/ IEC 61000-3-2:2000
	EN 61000-3-3:1995+A1:2001/ IEC 61000-3-3/A1:2001
	FCC Title 47 CFR, Part 15 Class A (2) (3)

Additional information

The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE marking accordingly.

1.The product was tested in a typical configuration with HP Personal Computer systems and peripherals.

2.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

●This device may not cause harmful interference.

●This device must accept any interference received, including interference that may cause undesired operation.

3.The product is assigned a Regulatory Model Number which stays with the regulatory aspect of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports; this number should not be confused with the marketing name or the product numbers.

216 Chapter 19 Legal information ENWW