How do I load/unload media

3.Pull to release the core adaptors (1).

4.Insert the core adaptors into the take-up reel right and left end plates and turn clockwise to secure.

When attaching printing material to the take-up reel:

●Check the leading edge of your media. If it is not evenly cut or if it is skewed, trim the printing material.

●Check that the media is straight when it is attached to the take-up reel, otherwise it will skew as it is wound onto the core.

NOTE The core tube on the take-up reel must be the same width as the printing material you are using.

ENWW

Use the take-up reel

HP 8000s manual How do I load/unload media