The problem is print quality
Symptom | Possible cause | Corrective measure |
|
|
|
Parts of a printed image are missing even | The nozzle is clogged. | Wash the printheads. See How do I… |
after printhead cleaning is performed |
| Clean ink system |
repeatedly. |
|
|
|
|
|
Poor print quality cannot be improved | The cap or wiper blade is stained. | Clean the cap and change the wiper |
even when the cleaning is performed. |
| blade. See How do I maintain the printer |
|
|
|
There is banding on new media | The printer requires calibration for the | Adjust the printer settings for the new |
| new media. | media. See How do I calibrate my printer |
There is banding on media that has been calibrated and did not give banding before.
If one of the following is true, try the corresponding solution and if banding has not disappeared, then go to the next possible cause and solution:
1.The file you are printing: a) is new
b) is not new
2.The print mode:
a)has changed
b)has not changed
3.Normal printhead recovery: a) did not improve banding b) improved banding
4.Strong printhead recovery: a) did not improve banding b) improved banding
Try one of the following solutions:
1.a) Try using a file that did not give banding. If banding does not disappear, then see the next possible cause.
b)Check that you are using the same print mode as before.
2.a) Try using the same print mode. If banding does not improve, then try a new roll of media. If you still see banding call HP support.
b)Try normal printhead recovery. If banding improves, repeat normal printhead recovery until no improvement is seen and banding is still present. Call HP support.
3.a) Print the NOZZLE PRINT pattern and check if there are any printhead nozzles not working. If some printheads are not working, try strong printhead recovery for the affected printheads.
4.a) Call HP support
b)Repeat normal printhead recovery until no improvement is seen and banding is still present. Call HP support.
144 | Chapter 9 The problem is print quality | ENWW |
