6.From the rear of the printer, tape (1) the edge of the media onto the core tube on the take-up reel. Tape on both edges and in the center (1).

NOTE Make sure the media is attached to the correct side of the tube. You may wind the media over the core tube for anti-clockwise winding, or under the core tube for clockwise winding.

Attach the media to the core tube in a straight line so that media winding is even.

7.Manually turn the media hub (1) to wind some media onto the take-up reel. Remember to turn the media hub in the same direction as the take-up reel winding direction for printing on the inside or the outside of the roll.

media load/unload I do How

52

Chapter 3 How do I load/unload media

ENWW