5.At the rear of the printer, loosen the stop screw (1) and position the left (3) and right (2) media roll holders so that the roll stops on each end of the roll can be placed on the holders.

NOTE Before lifting the roll of media onto the media roll holders, decide if you want to print on the media face up or face down. Media can be fed through the media path from over the roll (face up) (1) or from under the roll (face down) (2).

6.Lift the roll of media (1) onto the media roll holders.

How do I load/unload media

ENWW

Install a media roll in the printer

23

Page 33
Image 33
HP 8000s manual How do I load/unload media