How do I… basic operation topics?, Connect to a computer

2 How do I… (basic operation topics)?

●Connect to a computer

●Turn the power on/off

●Check the firmware version

Connect to a computer

This section describes system configuration and cable connection procedures.

NOTE Before connecting or disconnecting the USB Cable, turn the printer OFF.

System configuration (connection example)

The following connection is possible.

1.Printer server (RIP).

2.USB interface.

3.Printer.

Connection procedure

NOTE Before you connect the USB cable, you should ensure that the RIP is installed so that the printer can be detected by your operating system. Refer to the instructions that came with your RIP for installation instructions.