Parameters:none.
USB speed (USB SPEED)
This option sets the USB port speed.
Parameters: HIGH, FULL
Factory default setting (FACTORY DEFAULT)
This option sets all parameter values to default factory settings.
Parameters: none.
Printer firmware upgrade (PRINTER FW UPGRADE)
This option upgrades the printer firmware.
Parameters: none.
The HEATER menu
This menu is used to modify heater settings. Press the 
key to access heater options.
Heater delay time (HEATER DELAY TIME)
Use this option to turn the heater off after the selected amount of time.
Parameters: NONE, 30 min, 60 min, 90 min, 120 min, ENDLESS.
Tell me about… (menus)
ENWW | The HEATER menu | 193 |
