HP 8000s manual Media advance calibration, Default values for media types

Default values for media types

Your printer comes with a set of factory-installed media types. Except for media type 01, you can modify or delete all other media types. The table below lists the default values for the factory-installed media types.

	NAME	PAPER (01)	Glossy (02) & Matte (03)	Banner (04) & BLT_B
				(Backlit) (05)
	MEDIA ADV. VALUE	(Base) +0.00%	(Base) +0.16%	(Base) +0.14%
	DRY TIME VALUE	0 sec.	0 sec.	0 sec.
	PRINT MODE	NORMAL	NORMAL	NORMAL
	PRINT DIRECTION	BIDIR	BIDIR	BIDIR
Tell
	FLATTEN TIME	None	None	None
me
	USE EDGE GUARD	YES	YES	YES
about
	MEDIA ADV. MODE	FWD ONLY	FWD ONLY	FWD ONLY
…
	TUR MODE	LOOSE	LOOSE	LOOSE
(menus)	LEADING EDGE	NORMAL	NORMAL	NORMAL
	VACUUM LEVEL	NORMAL	NORMAL	NORMAL
	FRONT HEATER T	None	45 °C	45 °C
	PRINT HEATER T	None	40 °C	40 °C
	REAR HEATER T	None	45 °C	45 °C
	COLOR STRIPE	ON	ON	ON
	ADVANCE PREF	SOFTWARE	SOFTWARE	SOFTWARE
	BIDIRECTION DEF	+00&	+00&	+00&
	PH CLEANING	START&END	START&END	START&END
	BACK ADJUST VAL	0	0	0
	PRINT MODE PREF	SOFTWARE	SOFTWARE	SOFTWARE
	HEATER PREF	SOFTWARE	SOFTWARE	SOFTWARE

Media advance calibration

Media advance calibration is defined by using the M.ADV menu. Press the key to define and set values.

182 Chapter 14 Tell me about… (menus) ENWW