4 How do I… (printing topics)
●Perform a manual form feed/rewind
●Use manual nesting
●Increase/reduce pressure on media
Perform a manual form feed/rewind
This section describes how to manually feed or rewind media through the printing path, for example before and after cutting media. By using these automatic features, you reduce the risk of skew when you perform this task manually.
1.Press the ONLINE key.
2.Press the SHIFT key to display the FORM FEED and REWIND options.
3.To rewind or feed media, do one of the following:
a.Hold down the 
key to feed media forwards through the printing path.
While the 
key is pressed, the roll media advances. If cut sheet is loaded, it is discharged.
b.Hold down the 
key to rewind the media.
While the 
key is pressed, the roll media rewinds.
4.When the 
or 
key is released, media feeding or rewinding stops and the menu group is displayed.
topics)(printingHow do I…ENWW | Perform a manual form feed/rewind | 57 |