Load media on to the take-up reel

If you are using a two-inch cardboard core, make sure you remove the core adaptors installed on the take- up reel hubs as follows:

1.Remove the adaptor ring (1) from the take-up reel right end plate.

2.Insert the adaptor ring into the core adaptors on each take-up reel hub and turn anti-clockwise to release.

How do I load/unload media

48

Chapter 3 How do I load/unload media

ENWW

Page 58
Image 58
HP 8000s manual Load media on to the take-up reel