Samsung SCL810 manual Playback, Player

ENGLISH

Playing back a Tape

Notes:

■SCL810/L860/L870 feature a monaural audio system. If your TV or VCR are stereo, connect the audio cable to input “L” of your TV or VCR.

■You can use an S-VIDEO cable to obtain better quality pictures if you have an S-VIDEO connector on your TV.

■While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur.

Playback

1.Use the TV/VIDEO button to select VIDEO on your TV.

2.Connect power source (battery or AC Power Adapter) to the camcorder.

Set the power switch to PLAYER mode.

3. Insert a tape you want to see.

■ Make sure that STOP is displayed.

PLAYER

4. Press the (PLAY/STILL) button.

■The picture you recorded appears on the TV after 2 to 3 seconds.

■ Press ■ (STOP) to stop playing. PLAY/STILL

■If the tape reaches its end during playback,

the tape will rewind automatically.

Notes:

■ Vibration from the built-in speaker can cause picture distortion.

■It is best to turn the built-in speaker off when your camcorder is connected to the TV.

■The system (Hi8/8mm) is selected automatically, depending on the tape format.

■This camcorder does not support LP recording and playback.

58