ENGLISH
Basic Recording
Adjusting the LCD during PLAY
The LCD adjustment method in PLAYER mode is identical to step number 4 of page 30, except the power switch must be set to PLAYER.
Controlling the Sound from the Speaker
✤ When you use the LCD monitor while playing back, you can hear sound from the Speaker.
✤ Volume of the Speaker is controlled by the UP/DOWN dial tab on the camcorder.
✤If you close the LCD monitor, the LCD monitor and Speaker are turned off.
✤If the speaker does not work properly, check the following:
■Is the LCD monitor closed?
■Is the volume adjusted to a low level?
■Is the speaker off? (see page 60)
Notes: ■ Lower the volume if vibration from the
causes screen disturbance.
■PLAY/STILL Volume display will automatically disappear 2 seconds
after adjusting.
Viewing a Still Picture
■Press (PLAY/STILL) button during playback.
■To resume playback, press the (PLAY/STILL) button again.
REWFF
Picture Search
■ Keep pressing (FF) or (REW) button during playback. ■ To resume normal playback, release the button.
33