ENGLISH
Getting to Know Your Camcorder
OSD (On Screen Display)
j.Time (see page 46)
Indicates the time you are recording.
k.Title (see page 48)
Indicates the recorded title you have set. It is superimposed on the scene.
l.Self diagnosis (see page 68)
Displays different diagnostic indicators concerning the camcorder’s operation.
m.DSE (Digital Special Effect) (see page 44) Indicates the DSE mode is activated.
The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.
n.White Balance mode (see page 53) Indicates the White Balance mode is activated.
The White Balance modes are AUTO, INDOOR( 
) and OUTDOOR( 
).
o.Tape counter
Indicates amount of the tape used.
p.Operation mode
Indicates the operation mode is activated.
The operation modes are STBY, REC 
, STOP, PLAY( 
), FF( 
), REW( 
), EJECT.
q.Hi8 (see page 58)
Indicates you are using Hi8 tape when recording or playing back.
r.DEW ( 
) condensation (see page 71) Monitors the moisture condensation.
s.Digital zoom (see page 35) Indicates digital zoom is activated.
t.Snap Shot (see page 52)
Indicates the time left during Snap Shot Recording.
u.Zero return (SCL860/L870 only) (see page 59) Indicates that the zero return is activated.
v.PB DSE
Shows that the PB DSE mode is active.
w.VOLUME
x.EASY & CUSTOM
Shows when the easy or custom mode is active.
y.LIGHT
Shows when the Light is switched on.
z. Remocon ( | OFF) (SCL860/L870 only) |
Indicates the remocon off mode is activated.
17
