Electrolux C 9 18 43-4i Alarm reset button, Plug the mains plug into the mains socket

Models: C 9 18 43-4i

1 28
Download 28 pages 51.18 Kb
Page 11
Image 11

Temperature display

The temperature display can indicate several pieces of information.

During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1.Plug the mains plug into the mains socket.

2.Press ON/OFF button. The green mains pilot indicator illuminates. The alarm light flashes since the temperature is reached. The buzzer sounds.

3.Pressing button “P” the buzzer stops.

4.Press either the “J“ or “L“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

5.Set the required temperature by pressing the “J“ or “L“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperatu- re is adjusted by 1 °C.

From a food safety point of view -18 °C should be considered sufficiently cold for storing food in the freezer.

6.The alarm light,when the set temperature is reached. Press the alarm but- ton to turn off the buzzer.

FROSTMATIC

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.

1.The FROSTMATIC function is switched on by pressing the FROSTMATIC but- ton. The yellow light illuminates.

If the FROSTMATIC function is not ended manually, the appliance switch off the FROSTMATIC function after 48 hours. The yellow light goes out.

2.The FROSTMATIC function can be ended manually at any time by pressing the FROSTMATIC button again. The yellow light goes out.

Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (O) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (O) will continue to flash, although the buzzer has stopped.

When the alarm button is pressed, the warmest temperature reached in the compartment flashes on the indicator.

11

Page 11
Image 11
Electrolux C 9 18 43-4i Alarm reset button, Plug the mains plug into the mains socket, Pressing button P the buzzer stops