Tuner Operations
E n g l i s h
IMPORTANT!
–Make sure the FM and MW antennas are connected.
–The TUNING button on the front panel is used to toggle between frequency tuning and preset tuning. When in preset tuning mode, pressing S / T buttons on the front panel will change the preset number. Otherwise, pressing S / T will change the radio frequency.
Tuning to radio stations
1Press TUNER on the remote (or adjust SOURCE control on front panel) to select “FM TUNER” or “MW TUNER”.
2Press and hold S / T on the remote until the frequency indication starts to change, then release.
➜The next radio station will tune automatically.
➜
lights up for FM stereo reception.
3To tune a weak station, press S / T briefly and repeatedly until an optimal reception is found.
●If you use S / T on the front panel for frequency tuning, make sure the system is in frequency tuning mode.
If not, press TUNING.
➜ "FREQ MODE" appears.
Presetting radio stations
You can store up to 40 preset radio stations in the memory, starting from FM and followed by MW bands.
Helpful Hints:
–The system will exit presetting mode if no button is pressed within 20 seconds.
–If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all available radio stations automatically.
AUTO INSTALL - PRESS PLAY | PLAY• PAUSE | ||
| |||
|
|
| DVD VIDEO DIGITAL SURROUND SYSTEM |
|
|
| TREBLE |
| PLAY• PAUSE STOP SEATING | SOURCE | VOLUME |
EN RTE |
|
|
|
| R |
|
|
DVD | IGHT |
|
|
| SEARCH SURROUND |
|
|
SC CHANGER | PROG TUNING CLOCK•TIMER |
|
|
SU |
|
|
|
|
|
| |
SUB |
|
|
|
|
|
| BASS |
1Connect the system to the power supply,
"AUTO INSTALL - PRESS PLAY" appears.
OR
In Eco Power standby/standby mode, press and hold ÉÅon the front panel until "AUTO INSTALL - PRESS PLAY" appears.
2Press ÉÅon the front panel to start installation.
➜"INSTALL TUNER" appears.
➜All previously stored radio stations will be replaced.
➜Once completed, the last tuned radio station will play.
38
