Philips MX5800SA/22S manual Using the Disc Menu, Basic playback controls, Disc Operations

Disc Operations

Turning on/off auto Eco standby mode

It is a power-saving feature, the system will automatically switch to Eco standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing.

buttons on		DVD system’s
front panel		display panel
1	STANDBY- ON	13:38
2	STOP	AUTO ECO ON

1Press and hold STANDBY ON to

switch the system to standby mode. ➜ The clock appears.

2Press and hold Ç until “AUTO ECO ON” appears.

➜ To turn off the setting, repeat step 2 until “AUTO ECO OFF” appears.

Using the Disc Menu

Depending on the disc, a menu may appear on the TV screen once you load in the disc.

To select a playback feature or item

●Use the joystick (1 2 3 4) or

numeric keypad (0-9) on the remote, then press ÉÅor OK to start playback.

To access or remove the menu

●Press DISC MENU on the remote.

For VCD with Playback Control (PBC) feature (version 2.0 only)

●In stop mode, press DISC MENU to toggle between ‘PBC ON’ and ‘PBC OFF’,

then the playback will start automatically. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. Use the Joystick (1 2 34) to highlight your selection and press OK to confirm or use the numeric keypad (0-9) to select a play option.

●During playback, pressing DISC MENU will return to the menu screen (if PBC is on).

Basic playback controls

Pausing playback

●Press ÉÅ.

➜ To resume normal playback, press ÉÅ again.

Selecting another track/chapter

●Press S / T or use the numeric keypad (0-9)to key in a track/chapter number.

Searching backward/forward

●Press and hold S / T, then press ÉÅto resume normal playback.

➜ While searching, pressing and holding S / T again will increase the search speed.

Selecting next disc

●Press DISC SKIP.

➜ The selected disc will play once, then stop.

Stopping playback

●Press Ç.

Resuming playback from the last stopped point (DVD/VCD)

●In stop mode and when the disc has not been ejected, press ÉÅ.

To cancel the resume mode

●In stop mode, press Ç again. Helpful Hints:

–Opening the current disc tray or selecting another disc tray will cancel the resume feature.

–Resume option may not be available on some discs.

Replacing discs without interrupting playback

●Press OPEN•CLOSE 0 buttons of the inactive disc trays.

For example, if currently disc tray 1 is playing, you can replace the discs on disc trays 2~5.

E n g l i s h

23