Technical Details
Dimensions (in cm): |
|
Height (cm) | |
Width (cm) | 69,8 |
Depth (cm) | 50,5 |
Maximum absorbed power: | 210 W |
Motor power: | 1 x 170 |
Lighting: | 2 x 20 W |
Length of the cable: | 150 cm |
Electrical connection: | 220 - 240 V |
Subject to change without notice. |
|
Installation
Unpacking
Check that the cooker hood has no damages. Transportation damages should immediately be reported to the company responsible for the transportation.
Damages, faults and eventually missing details should immediately be reported to the retailer. Take care of the packing materials so that small children cannot play with them.
Fitting
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60 cm. above electric burners or 70 cm. above gas or
The hood can be installed above these heights but for optimum performance it should be installed at the distance quoted for the appropriate heat source.
Electrical connection for UK only
Safety warnings for the electrician | |
Connect the hood to the mains supply via a double | |
pole switch which has 3 mm minimum separation | |
between the contacts. | |
The switch must be accessible at all times. | |
The following is valid in the United Kingdom | |
only: | |
- the wire which is coloured blue must be | |
connected to the terminal which is marked with | |
the letter N or coloured black, - | |
- the wire which is coloured brown must be | |
connected to the terminal which is marked with | |
the letter L or coloured red. |
Fig. 7 - Fitting
Min | Min | |
70 cm | ||
60 cm | ||
|
