66
Control Panel
The switches are mounted on the upper right side of the visor (Fig. 1
- E).
The numbers and symbols have the following meanings (from left to
right):
The fan is controlled by moving the sliding switch.
The extractor part (visor) of the hood is used to switch the fan on and
off when the appliance is switched on (Motor).
When the visor of the appliance is withdrawn, the fan automatically
switches on.
If the visor is pushed in without operating the switches, the fan is
switched off.
The lighting can be separately switched on and off with the slide switch.
Turn the hood on a few minutes before you start cooking then you will
get an underpressure in the kitchen. It should be left on after cooking
for about 15 minutes or until all odours have disappeared.
= fan set 4
= fan set 3
= fan set 2
= fan set 1
= Light
= Light OFF
= Light ON
1
2
3
4
= Continuously variable
fan control
= Intensive setting
= Light OFF
= Light ON
= Light
CHDF 6260 -ML/GB - PNC 942 120 679
DF 6260 -ML/AUS - PNC 942 120 712
DF 6260 -ML - PNC 942 120 645
DF 6260 -ML/1 - PNC 942 120 820
DF 6160 -ML - PNC 942 120 644