1 | 2 |
3 | 4 |
5 | 6 | 7 |
8
9 | 10 |
Accessories
1* | Telescopic tube | 7 | Accessories clip |
2* | Extension tubes | 8* | Turbo nozzle |
3 | Hose handle + hose | 9* | Parquet nozzle |
4 | Combination floor | 10* Feather duster | |
| nozzle |
|
|
5Crevice nozzle
6Upholstery nozzle
Safety precautions
CycloneXL should only be used by adults and only for normal vacuuming in a domestic environment. The vacuum cleaner features double insulation and does not need to be earthed. Disconnect the plug from the mains before cleaning or maintenance of the vacuum cleaner. Be sure to keep the vacuum cleaner in a dry place. All servicing and repairs must be carried out by an authorised Electrolux service centre.
Never vacuum:
•In wet areas.
•Close to flammable gases etc.
•When housing shows visible signs of damage.
Never vacuum:
•Sharp objects, fluids.
•Hot or cold cinders, lit cigarette butts, etc.
•Fine dust, for example from plaster, concrete, flour,
hot or cold ashes.
The above may cause serious damage to the motor
– damage which is not covered by the warranty.
Electrical cable precautions:
Regularly check that the cable is not damaged. Never use the vacuum cleaner if the cable is damaged. Damage to the machine’s cable is not covered by the warranty.
* Certain models only.
Before starting
11Open the front cover on the machine and check that the motor filter and the dust container filter are in place. (See also Cleaning/replacing the
filters.)
12* Open the back lid on the machine and check that the exhaust filter is in place.
13 Insert the hose until the catches click to engage (press the catches to release the hose).
3Insert the hose into the hose handle until the catches click to engage (press the catches to
release the hose).
14Attach the extension tubes* or telescopic tube* to the hose handle and nozzle by pushing and twisting together. (Twist and pull apart to dis- mantle.)
15Extend the electric cable and connect it to the mains. The vacuum cleaner is fitted with a cable winder. Once the electric cable has been exten- ded, it stays in that position.
16To rewind the cable, press the cord rewinder
pedal. The cable will then rewind.
17a Start the vacuum cleaner by rotaring the power control in the direction of the “Max” position. Increase suction power by rotaring the control further up to “Max” position. Stop the vacuum cleaner by rotaring in the opposite direction to “Off” position.
In order to achieve an optimal cyclone effect in the cleaner, the power regulation should always be in the “Max” position.
17b* Suction power can also be adjusted by using the suction control on the hose handle.
18Ideal parking position for pausing (18a) and storing (18b).
* Certain models only.
11 | 12 | 13 |
14 | 15 | 16 |
17a | 17b |
18a | 18b |