Overriding the child safety lock
The child safety device can be released in this way for a single cooking session; it remains activated afterwards.
Step |
| Control panel | Display | ||
1. | Switch on the appliance | l / h (if hot) | |||
| Touch | of the front right | 4 x ¾ Decimal points flash | ||
2. | cooking zone and | at the |
| ||
| same time |
|
| ||
Until the appliance is next switched off, it can used as normal. | |||||
|
|
|
|
| |
Safety
Cooking surface
•If after switching on the appliance a heat setting is not set for a cooking zone within approx. 10 seconds, the appliance automatically switches itself off.
•If one or more sensor fields are touched for longer than approx. 10 seconds, the cooking surface is automatically switched off. ER03 flashes on the display or changes to h if there is still residual heat.
•If all cooking zones are switched off, the cooking surface automati- cally switches itself off after approx. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel switches all cooking zones off.
Cooking zones
•If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. h is displayed.
Heat setting | Switches off after |
1 - 2 | 6 hours |
3 - 4 | 5 hours |
5 | 4 hours |
|
|
6 - 9 | 1.5 hours |
|
|
10