71
•Draw a line with a pencil on the middle of the internal side of the
furnituture door. Fig. 14.
•Fit the visor upon the internal side of the furniture door so that the
line previously marked on it, is visible through the two triangles holes
located on the mid upper and lower side of the visor, having care to
respect the distance from the visor to the higher edge of the furniture
door as for the reason mentioned above in Fig. 12.
•Fasten the visor to the furniture door through the 8 screws L 4,5x13
mm supplied. Fig. 14.
•Replace the complete visor assembly into the extractor hood, first
inserting it on its upper, then on its lower guides.
•Turn the rear unlocking knobs H so to avoid the visor take off. Fig.
13.
•Refit the grease filters.
GH
Fig. 13
==
L
Fig. 14