PreparingforInstallation 7

VERIFY PACKAGE CONTENTS

• Use & Care Manual

• Cleaning Kit

• Hold Down Bracket Kit

• Grill Drip Pan (E46GC67ESS only)

• Grate/Burner Cap Pack

• Grill U-Burner (E46GC67ESS only)

• Burner Set

• Grill Heat Control Channels (E46GC67ESS only)

• Gas Pressure Regulator

• Grill (E46GC67ESS only)

• LP Conversion Kit

• Grease Control Box (E46GC67ESS only)

CABINET/COUNTERTOP PREPARATION

The installation of this built-in appliance must be completed by a qualified appliance technician or contractor. Proper installation is the owner’s responsibility.

Carefully check the location where the cooktop is to be installed. The cooktop should be placed for convenient access, but away from drafts that may be caused by open doors and windows or by HVAC duct outlets. Make certain that gas and electrical power can be provided in the selected locations. Plan the installation so that all minimum clearances are met or exceeded. Dimensions shown provide minimum clearances, unless otherwise noted.

!WARNING

•To reduce the risk of personal injury caused by reaching over a hot appliance, cabinet storage space located directly above the cooktop should be avoided.

•Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

•Failure to provide proper clearances may result in a fire hazard!

•Do not store combustible materials or items adversely affected by heat immediately below the cooktop.

•The back edge of the cooktop must remain a minimum of 2 1/2" (64mm) from any combustible backsplash material. This will require special cabinet and countertop dimensions.