Electrolux E36EC75ESS Gas Slide-In Cooktop, Electrolux Major Appliances, N.A, 3/8 7 1/4

Models: E36EC75DSS E36EC75ESS

1 4
Download 4 pages 12.3 Kb
Page 2
Image 2
Gas Slide-In Cooktop

Gas Slide-In Cooktop

E36GC76GPS

36" min.

35 7/8"

13" 3/8" 2" max. 36" Gas Slide-In Cooktop Specifications

cabinet depth

25"

30" min. for

unprotected cabinet

18"

min. 24" min. with protected bottom

surface

Optional 9" stainless steel backsplash (attaches to wall)

Side inset 5/8"

1" min. recommended distance between rear edge of cutout and nearest combustible surface above countertop Electrolux Major Appliances, N.A.

Optional Accessories 3" Manual background

2" dia. Manual background opening to route power cable

22 1/8"

11/8" 24" max.

1" countertop Manual background overhang

3515/16" **

 

 

 

 

2"

 

2

1/2"

Support

 

platform

351/8"

 

 

4" x 4" opening to route gas supply

Manual background 7 1/2"

7 3/4"

**Applies only in case of countertop backwall

7" min. to nearest combustible wall (either side of unit)

3/8"

7 1/4"

35 3/16" * 3515/16" *

*Both cutout dimensions are critical to proper cooktop installation.

Due to variations in countertop materials it is recommended to undercut finished dimension 3515/16" and adjust upon installation of cooktop.

36" Gas Slide-In Cooktop Specifications

Product Weight – 115 Lbs.

Voltage Rating – 120V/ 60Hz/15 Amp

Connected Load (kW Rating) @120 Volts = 0.001kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

Amps @120 Volts = 0.008 Amps

Always consult local and/or national electric and gas codes.

Cooktop ships with 3/4" factory regulator.

LP Gas conversion kit supplied.

Plan installation to have electrical connection, gas shutoff valve, and pressure regulator accessible from front of cabinet. Locate 120V grounded outlet in a 4"W x 5"H area on rear wall, 16" above floor, aligned center with cooktop.

Cabinet and/or countertop must completely enclose recessed portion of cooktop. Respect cutout dimensions and clearances and ensure that all contact surfaces are solid and level.

Overhead cabinetry should not exceed a 13" maximum depth.

Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry.

Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

Electrolux Major Appliances, N.A.

Allow 1" minimum clearance between rear edge of cooktop and nearest combustible surface above countertop. If required clearance can not be maintained, then optional stainless steel backsplash or noncombustible backsplash material must be used – otherwise installation will require custom cabinet and countertop dimensions.

Allow 7" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit.

It is recommended that drawers not be used beneath cooktop.

To reduce risk of fire when using overhead cabinetry, install vent hood that projects horizontally a recommended minimum of 7" beyond bottom of cabinets.

Gas Slide-In Cooktop model E36GC76GPS is NOT approved to be used over any Electrolux ICON® Single Wall Oven.

Gas Slide-In Cooktop model E36GC76GPS (without optional backsplash) is approved to be used in combination with an Electrolux ICON®

36” Downdraft Vent. (Refer to Slide-In Cooktop /Downdraft Vent Countertop Preparation page on web for detailed installation specifications.) Proper combination installation will require cooktop power cord to be relocated to underside of unit. (For details, refer to 30" & 36" Gas Slide-In Cooktop Power Cord Relocation Instructions on web.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Optional Accessories

When replacing an existing cooktop with countertop cutout deeper

than 7-1/4" and less than 8-1/2", order free Depth Adjustment Filler Kit – (PN# 903051-9010).

9" Stainless Steel Backsplash – (PN# 903048-9010).

Black Knobs Kit – (PN# 903049-9120).

USA 250 Bobby Jones Expressway Augusta, GA 30907 1-877-4electrolux (1-877-435-3287) electroluxicon.com

High standards of quality at Electrolux Home Products, Inc. mean we are

CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 electroluxicon.ca

constantly working to improve our products. We reserve the right to change

specifications or discontinue models without notice.

E36GC76GPS 01/09

© 2009 Electrolux Home Products, Inc.

Printed in the U.S.A.

Page 2
Image 2
Electrolux E36EC75ESS Electrolux Major Appliances, N.A, Gas Slide-In Cooktop Specifications, Optional Accessories