16 Installation
INSTALLING THE HOOD
1 Raise the hood into its mounting location.
2 Align the rectangular opening on the back of the hood with the wall-mounting
bracket. Gently lower the hood until it securely engages the bracket.
3 Make minor changes to the hoods horizontal and vertical position by adjusting
screws on the wall mounting brackets.
4 After the hood is level, secure the hood to the wall with (2) additional mounting
screws. Use drywall anchors provided if framing or studs are not available.
INSTALL THE FLUE MOUNTING BRACKET
Secure the flue mounting bracket to the ceiling and wall using (4) 4.8 x 38mm mounting
screws and drywall anchors. Make sure the bracket is pushed into the corner, tight
against the wall and centered over the hood.
RECTANGULAR CUTOUTS
ADDITIONAL MOUNTING
SCREWS
MOUNTING
BRACKETS
Figure 9
WOOD
FRAMING
DRYWALL
MOUNTING
BRACKET
HORIZONTAL
ADJUSTMENT
SCREW
VERTICAL
ADJUSTMENT
SCREW
DRYWALL
ANCHORS
MOUNTING
SCREWS 4.8
x 38 mm
UPPER
BRACKET
Figure 11
Figure 10
NOTE
At least two people will be required to mount the hood.