19
Installation
VERIFYING OPERATION
• Install the filters.
• Verify that the hood control knobs are in the OFF position.
• Turn on the main power supply.
• Slide light switch to the ON position. Lights should illuminate.
• Slide blower switch to the ON position. Then slide the speed control
switch to check operation of the variable speed.
• Turn off light switch and blower switch.
WARNING
• If the hood is not operational after completion of the installation, do not attempt
to repair it. See the Problem Solving section of the Use & Care Guide, then call a
qualified service technician if the system is still not functional.
• Always disconnect the appliances from the electrical power when servicing them.