16 something not working technical data consumption values electrolux

If you are unable to identify or solve the problem, contact our service centre. Before phoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

Important: if you call out an engineer to a fault listed on page 15, or to repair a fault caused by incorrect use or installation,

a charge will be made even if the appliance is under warranty.

Installation

Unpacking

Slide out the polyethylene bag with the polystyrene stuffing before using the appliance. Pull off the adhesive strips from the top of drum inside the machine.

Technical data

Dimensions

Electrical connection 6OLTAGEånå/VERALLåPOWERå

– Fuse

Depth with loading door open

-AXIMUMå,OAD

5SE

Width 60cm

(EIGHTåCM

Depth 58cm

Information on the electrical connection is given on the rating plate on the inner edge of the appliance door

109cm

Cotton 7kg

Synthetics 3kg

Domestic

+ 5°C + 35°C

Please Note: If this appliance is supplied from a cord extension set or electrical portable outlet device it must be positioned so that it is not subject to splashing or ingress of moisture.

The tumble dryer must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer in such a way that a full opening of a tumble dryer door is restricted.

Positioning

It is recommended that, for your convenience, the machine is positioned close to your washing machine.

The tumble dryer must be installed in a clean place, where dirt does not build up. Air must be able to circulate freely all around the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.

To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

Page 16
Image 16
Electrolux EDC47130W user manual Installation, Technical data, Unpacking, Positioning