16 electrolux programme information

Programme information

Permanently
program in the
audible signal
which reminds you
that the programme
is complete.
1. Turn the programme selector to any programme.
2. Press the BUZZER button and hold down for approx. 5
seconds.
A brief signal sounds several times. The Buzzer display flashes
several times. The setting is permanently programmed. The
setting is cancelled as described under 1 and 2.
Adjust detection of
degree of drying:
If the laundry is
slightly drier or
slightly damper at
the end of the
programme than
with the standard
setting.
1. Turn the programme selector to any programme.
2. Press the START and the DRYNESS buttons at the same
time and hold down for approx. 5 seconds.
The current setting is displayed on the programme
progress display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting
required appears on the programme progress display.
4. Turn the programme selector to “O”.
The setting is permanently programmed.
If the EMPTY
WATER display is
to remain permanently
deactivated when
using an external
condensate drain.
1. Turn the programme selector to any programme.
2. Press the Dryness and DELICATE buttons at the same
time and hold down for approx. 5 seconds.
The EMPTY WATER display flashes briefly. The EMPTY WATER
display is permanently deactivated. Settings may be cancelled as
under 1 and 2, but the EMPTY WATER.
O = Cancelling/OFF To r eset a pr ogramme and to switch off the machine turn the
selector dial to O. Now can a new programme be selected.
Objective Implementation

CChhiilldd LLoocckk

The child lock can be activated or desactivated by pressing the
buttonsTIME and DRYNESS at the same time:
– before starting a pr ogram: the appliance can not be used
– after starting a program: the running drying cycle can not be
changed.
If the child lock is activated, the display shows the symbol
At the end of a drying cycle the child lock will not be desactivated
automatically.
If a new program should be selected, first the child lock must be
desactivated.
125985630 gb.qxp 2006-07-20 08:30 Page 16