–17 –EN
0C28
–17 –
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TVprograms,
movies, news, etc. with either a dialogue caption or
text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2:You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
•Automobile ignition noise
•Electric motor brush noise
•Weak snowy reception on TVscreen
•Multiplex signal reception displaying picture
ghosts or airplane flutter.
TV
NOTE:
If the TV/DVD displays a black
box on the TVscreen, this means
that the TV/DVD is set to the
TEXT mode. To clear screen, select
[CAPTION1], [CAPTION2] or
[OFF].
Make sure ...
•TV/DVD power must be turned on.
1Select “CAPTION”
Press SETUPon the remote control.
Press Kor Lto point to “CAP-
TION”.
2Select your desired caption menu
Press ENTER until your desired
caption menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3Exit the caption setting mode
Press SETUPon the remote control to return to TV
mode.

TO CANCEL THE CLOSED CAPTION

SYSTEM

Repeat steps [1] and [2], select [OFF] using ENTER.
Press SETUPon the remote control to return to TV
mode.

WHEN THE CLOSED CAPTION MODE

IS ON

The On-Screen Display will disappear after 5 sec-
onds.
•This is also true when MUTE is pressed.
•If there is a power failure of any kind, the unit will
retain its memory for this feature.
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [OFF]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [OFF]
T
he Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.
1Set “SLEEP TIMER”
Press SLEEPon the remote control.
You may change the sleep time
with pressing SLEEPon the remote
control repeatedly. The timer is set
up to 120 minutes, 30 minutes each
time SLEEPis pressed.
NOTES:
•When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
•To view the time left for sleep timer press SLEEP
once when SLEEPdisplay disappears. After 10
seconds, display will disappear again.
To cancel the sleep timer:
Press SLEEPrepeatedly until "SLEEP 0 MINUTE"
is displayed.
TV
SLEEP 120 MINUTE
SLEEP TIMER
TD701/801.QX33 03.1.31 10:59 PM Page 17