–15 –EN
0C28
–15 –
CHANNEL SET UP AGAIN
1Select “CHANNEL SET UP”
Press SETUPon the remote control.
Press Kor Lto point to “CHAN-
NELSET UP”.
Then, press ENTER.
2Begin auto preset
Press Kor Lto point to “AUTO
PRESET”. Then, press ENTER.
The tuner scans and memorizes all
the active channels in your area.
NOTES:
•The TV/DVD distinguishes between standard TV
channels and cable(CATV) channels.
•The TV/DVD may memorize TVchannels as
CATVchannels if reception conditions is poor. If
this happens, try AUTO PRESETaction again
when reception conditions are better.
3After scanning
The tuner stops on the lowest memorized channel.
TV
SELECTING THE LANGUAGE
NOTE: This function effects only the language on
the screen menu and not the audio source.
1Select “LANGUAGE”
Press SETUPon the remote control.
Press Kor Lto point to “LAN-
GUAGE”.
Then, press ENTER to select
“ENGLISH” or “ESPAÑOL”=
Spanish or “FRANÇAIS”= French.
2Exit the Language mode
Press SETUPon the remote control to return to TV
mode.
NOTE: If Spanish or French is selected accidentally,
1)Press SETUP on the remote control.
2)Press Kor Lto point to “IDIOMA [ESPAÑOL]”
or “LANGAGE” [FRANÇAIS].
3)Press ENTER to select your desired language.
4)Press SETUP to exit.
TV
- TV SETUP -
BCHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (TV)
BAUTO PRESET
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
BLANGUAGE [ENGLISH]
CAPTION [OFF]
TD701/801.QX33 03.1.31 10:59 PM Page 15