CONNECTING TO ASTEREO SYSTEM
To Right (red) and Left (white)
AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
L
AUDIO OUT
R
COAXIAL
ANT.
AUDIO OUT
L
R
COAXIAL
NOTES:
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for your stereo system and any other components to be connected to the
TV/DVD.
•The monaural sound is output from the stereo system when the TV/DVD is in the TVmode.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITALINPUT JACKS, MD DECK OR DATDECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
NOTES:
•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DATdeck.
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•Set DOLBYDIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY
DIGITALto OFF.)
L
AUDIO OUT
R
COAXIAL
ANT.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 7]
[Fig. 8]
–12 –EN
0C28
–12 –
TD701/801.QX33 03.1.31 10:59 PM Page 12