installation safety instructions electrolux 39
Installation safety instructions•Important! The appliance must be
moved in vertical position for trans-
port.
• Before first starting up, all parts of
the transport safety equipment must
be removed. The machine may oth-
erwise be damaged.
• The appliance must not be built-in.
• Before starting up for the first time,
ensure that the nominal voltage and
type of current specified on the ap-
pliance’s rating plate match the nom-
inal voltage and type of current at the
installation site. The electrical fuse
required can also be found on the
rating plate.
• Always connect the machine to an
earthed socket in accordance with
current wiring regulation.
The manufacturer declines any re-
sponsibility for damage or injury
through failure to comply with the
above safety precaution.
• With permanent connections: A per-
manent connection may only be es-
tablished by an authorised specialist
electrician.
• Do not install appliance in rooms at
risk of frost.
• Do not install the appliance behind
– a door that locks
– a sliding door
– a door with a hinge that lies oppo-
site the hinge of the appliance.
• The door of the appliance must not
be able to be blocked by house
doors or other appliance doors.
• Do not install on a carpet with a high
pile. Air circulation at the ventilation
holes will be hindered.
• Ensure that the appliance is not
standing on the mains cable.
• Install the machine horizontally.