starting a drying programme electrolux 27
Starting a drying programme
Press the START/PAUSE (INICIO/PAU-
SA) button. The programme is started.
The programme progress display shows
drying progress. The symbols for
DRYING and COOLING appear in
the display one after the other. The
number of droplets in the dryness indi-
cator gradually goes down as the drying
process progresses.

Changing a programme

To change a programme which has
been selected by mistake once the pro-
gramme has started, first turn the pro-
gramme selector to O OFF and then
reset the programme.
The programme can no longer be
changed directly once the pro-
gramme has started. If you never-
theless attempt to change the
programme with the programme
knob or an additional function but-
ton (except the BUZZER (ALARMA)
button), the START/PAUSE (INICIO/
PAUSA) button and Err will flash in
the display. The drying programme
is not however affected by this.

Putting in extra items or taking

items out before end of pro-

gramme

1. Open loading door
Warning!Laundry and drum can bec
omeh ot.Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must
audibly lock.
4. Press the START/PAUSE (INICIO/
PAUSA) button to continue the dry-
ing cycle.

Drying cycle complete / removing

laundry

Once the drying programme has fin-
ished, ANTICREASE lights up in the
display. If the BUZZER is activated,
an audible signal sounds at regular inter-
vals.
The drying cycle is automatically
followed by a anti-crease phase
which lasts around 30 minutes.
The drum rotates at intervals during this
phase. This keeps the laundry loose and
free of creases. It can be removed at any
time during the anti-crease phase. (The
laundry should be taken out towards the
end of the anti-crease phase at the lat-
est to prevent creases from forming.)
1. Open door.
2. Before removing the laundry, remove
fluff from the micro-fine filter. It is best
to use a damp hand for this purpose.
(See “Cleaning and maintenance”
section.)
3. Remove laundry.
4. Turn the programme knob to OOFF.
Important! After each drying cycle
– Clean the micro-fine filter and fine fil-
ter
– Drain the condensed water contain-
er
(See section “Cleaning and mainte-
nance”.)
5. Close door.