Safety warnings

For the installer

When used as an extractor unit, the hood must be fitted with a 120mm diameter hose. Attention: The hose is not supplied and must be purchased separately.

When installing the hood, make sure you observe the following minimum distance

from the top edge of the cooking hob/ring surfaces:

electric cookers

600

mm

gas cookers

700

mm

If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

The national Standard on fuel-burning systems specifies a maximum depression of 0.04 mbar in such rooms.

The air outlet must not be connected to chimney flues or combustion gas ducts. The air outlet must under no circumstances be connected to ventilation ducts for rooms in which fuel-burning appliances are installed.

The air outlet installation must comply with the regulations laid down by the relevant local authorities.

When the unit is used in extraction mode, a sufficiently large ventilation hole must be provided, with dimensions that are approxi- mately the same as the outlet hole.

National and regional building regulations impose a number of restrictions on using hoods and fuel-burning appliances connected to a chimney, such as coal or oil room-heaters and gas fires, in the same room.

Hoods can only be used safely with appliances

connected to a chimney if the room and/or flat

￿￿

 

(air/environment combination) is ventilated from

 

outside using a suitable ventilation hole approxi-

 

mately 500-600 cm2 large to avoid the

 

possibility of a depression being created during

 

operation of the hood.

 

• If you have any doubts, contact the relevant

 

controlling authority or building inspector’s

 

office.

 

• Since the rule for rooms with fuel burning

 

appliances is “outlet hole of the same size as the

 

ventilation hole”, a hole of 500-600 cm2, which

 

is to say a larger hole, could reduce the perfor-

 

mance of the extractor hood.

 

• If the hood is used in its recirculation mode, it

 

will operate simply and safely in the above

 

conditions without the need for any of the

 

aforementioned measures.

When the hood is used in its extraction mode, the following rules must be followed to obtain optimal operation:

-short and straight outlet hose

-keep bends in outlet hose to a minimum

-never install the hoses with an acute angle, they must always follow a gentle curve.

-keep the hose as large as possible (preferably the same diameter as the outlet hole).

-the length should be no more than:

3 metres with one 90° bend

2 metres with two 90° bends

Bends of more than 90° will reduce the efficiency of the hood and reduce the airflow.

Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the extractor hood.

Page 34
Image 34
Electrolux EFC650-950, EFCL650, CH1200-600-900 user manual Safety warnings, For the installer

EFC650-950, CH1200-600-900, EFCL650 specifications

The Electrolux EFCL650 range is a standout choice in the realm of kitchen ventilation, showcasing an impressive blend of functionality and sleek design. This model exemplifies the company’s commitment to high-quality products that not only enhance kitchen aesthetics but also maximize performance. The EFCL650 is particularly notable for its powerful extraction capabilities, brilliantly managing the cooking aromas, smoke, and grease that can accumulate in even the busiest kitchens. With a powerful motor that ensures efficient airflow, this range hood can maintain a fresh and clean atmosphere while you whip up culinary masterpieces.

One of the standout features of the EFCL650 is its innovative four-speed fan settings, which allow users to customize extraction power according to their cooking style and needs. Whether simmering a delicate sauce or searing a steak, this model offers the versatility required for each scenario. Additionally, the inclusion of LED lighting not only provides excellent visibility over the cooking area but also contributes to energy-efficiency, reducing overall power consumption.

The EFC650-950 model builds upon these impressive features, offering a wider extraction width to accommodate larger cooktops. Its efficient motor paired with advanced baffle filters ensures optimal grease and odor removal, making it an excellent choice for heavy-duty cooking. Furthermore, the EFC650-950 is engineered with easy-to-clean filters that can be maintained effortlessly, ensuring lasting performance and hygiene.

The CH1200-600-900 model is yet another hallmark of Electrolux's dedication to kitchen efficiency. This hood features seamless integration of cutting-edge technologies, including smart sensors that automatically adjust fan speeds based on detected cooking activity. This not only simplifies operation but also conserves energy when full power is not needed.

All three models boast a modern, minimalist aesthetic that complements a variety of kitchen designs. The stainless steel finish adds both durability and elegance, while the intuitive control panel ensures ease of use. With noise levels kept at a considerate minimum, the user experience is both functional and peaceful.

In conclusion, the Electrolux EFCL650, EFC650-950, and CH1200-600-900 models represent the pinnacle of kitchen ventilation technology. Their powerful extraction capabilities, innovative designs, and user-friendly features make them indispensable for any cooking enthusiast looking to enhance their kitchen environment while maintaining style and efficiency.