16 electrolux
Before cleaning switch the
oven off and let it cool down.
The appliance must not be
cleaned with a superheated
steam cleaner or a steam jet
cleaner.
Important: Before carrying out any
cleaning operation, the appliance must
be disconnected from the power supply.
To ensure a long life for your appliance,
it is necessary to perform the following
cleaning operations regularly:
- Only perform when the oven has
cooled down.
- Clean the enamelled parts with
soapy water.
- Do not use abrasive cleaners.
- Dry the stainless steel parts and glass
with a soft cloth.
- If there are stubborn stains, use
commercially available for stainless
steel or warm vinegar.
The oven’s enamel is extremely durable
and highly impermeable. The action of
hot fruit acids (from lemons, plums or
similar) can however leave permanent,
dull, rough marks on the surface of the
enamel. However such marks in the
brightly polished surface of the enamel
does not affect the operation of the oven.
Clean the oven thoroughly after every
use. This is the easiest way to clean dirt
off. It prevents dirt being burnt on.

Cleaning Materials

Before using any cleaning materials on
your oven, check that they are suitable
and that their use is recommended by
the manufacturer.
Cleaning and Maintenance
Cleaners that contain bleach should NOT
be used as they may dull the surface
finishes. Harsh abrasives should also be
avoided.

External Cleaning

Regularly wipe over the control panel,
oven door and door seal using a soft cloth
well wrung out in warm water to which a
little liquid detergent has been added.
To prevent damaging or weakening the
door glass panels avoid the use of the
following:
• Household detergent and bleaches
• Impregnated pads unsuitable for non-
stick saucepans
• Brillo/Ajax pads or steel wool pads
• Chemical oven pads or aerosols
• Rust removers
• Bath/Sink stain removers
Clean the outer and inner door glass using
warm soapy water. Should the inner door
glass become heavily soiled it is
recommended that a cleaning product
such as Hob Brite is used. Do not use
paint scrapers to remove soilage.