18electrolux

6)place the door on a stable surface (Fig. 4) protected by a soft cloth to prevent the handle surface from being dam- aged;

7)release the locking system to remove the internal panes of glass (Fig. 5);

8)turn the 2 fasteners 90° and extract them from their seats (Fig. 6);

9)gently lift and carefully take off the uppermost pane marked by a decora- tive frame on 4 sides (Fig. 7).

Clean the oven door with lukewarm wa- ter and a soft cloth. Do not use products such as scouring pads, steel wool, abra- sive sponges or acids because they could damage the special heat-reflecting sur- face of the internal panes of glass.

After cleaning, reassemble the panes in the door and then the oven door, follow- ing the procedure described above in reverse. Make sure you reposition the panes correctly.

To perform this operation correctly, pro- ceed as follows:

-the decorated internal pane with a frame on the 4 sides must be reas- sembled so that the screen-printing is facing outwards. The side of the pane of glass is correct if you do not feel any roughness near the screen printing when you pass your fingers over the surface.

90°

Fig. 6

Fig. 4

Fig. 5

 

2

1

Fig. 7

 

Page 18
Image 18
Electrolux EFT60001W user manual