Electrolux EFT 530, EFT 535, EFT 630, EFT 635 Maintenance and Care

Warning

•Failure to observe the instructions on cleaning

the unit and changing the filters will cause a

fire hazard. You are therefore strongly

recommended to follow these instructions.

•The manufacturer declines all responsibility for

any damage to the motor or any fire damage

linked to inappropriate maintenance or failure

to observe the above safety recommendations.

Cleaning the hood

•Clean the outside of the hood using a damp

cloth and a mild detergent.

•Never use corrosive, abrasive or flammable

cleaning products.

•Never insert pointed objects in the motor’s

protective grid.

•Wash the outside surfaces using a delicate

detergent solution. Never use caustic detergents

or abrasive brushes or powders.

•Only ever clean the switch panel and filter

grille using a damp cloth and delicate

detergents.

•It is extremely important to clean the unit and

change the filters at the recommended intervals.

Failure to do so will cause grease deposits to

build up that could constitute a fire hazard.

Metal grease filter (EFT 635-535)

•The purpose of the grease filters is to absorb

grease particles which form during cooking and

it must always be used, either in the external

extraction or internal recycling function.

Attention: the metal grease filters must be

removed and washed, either by hand or in the

dishwasher, every four weeks.

Removing the metal grease filter

First pull the latches backwards (a), then

extract the grille outwards (b).

Hand washing

Soak grease filters for about one hour in hot

water with a little washing-up liquid added,

then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters

when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select

most powerful washing programme and highest

temperature, at least 65°C. Repeat the process.

Refit the grease filters when they are dry.

When washing the metal grease filter in the

dishwasher a slight discolouration of the filter

can occur, this does not have any impact on its

performance.

•Clean the inner housing using a hot detergent

solution only (never use caustic detergents,

abrasive powders or brushes).

•The hood must always be disconnected from the electricity supply before beginning any maintenance

work.

Maintenance and Care

ab

b

Fig. 4 -Removing the metal grease filter

Latch - EFT 635 - EFT 535

Latch - EFT 630 - EFT 530

Fig. 5 - Paper Grease filter

Grease

filter

Stops

Latch

Grid