Electrical connections, Permanent Connection

Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

Φ• put the seals supplied with the hob, on the edges of the cut out: place them exactly on the front and rear edge and at 50 mm. from the side edges, taking care that the seals meet without overlapping;

•place the hob in the cut out, taking care that it is centred;

•fix the hob with the relevant fixing clamps and screws, as shown in the diagram. When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO 0199

a) Sealing gasket

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

Φ— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbolor coloured green and yellow.

—Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

—Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

Supply cable replacement

The cable used to connect the hob to the electrical supply must comply to the specifications given below.

Min. size Cable/flex	Cable / flex type	Fuse

0.75 mm2	H05 V2V2-F (T90)	3 A

FO 0390

EHG 680 specifications

The Electrolux EHG 680 is a state-of-the-art gas cooktop that merges style and functionality to enhance your culinary experience. Designed with the modern kitchen in mind, this cooktop offers an array of features and technologies that make cooking efficient and enjoyable.

One of the standout attributes of the Electrolux EHG 680 is its robust construction. Featuring a sleek stainless-steel surface, it is not only aesthetically pleasing but also easy to clean and maintain. The four gas burners are strategically positioned to accommodate different pot sizes, ensuring optimal cooking space. Each burner delivers precise flame control, allowing users to adeptly manage heat settings for various cooking techniques, from simmering sauces to searing meats.

The cooktop is equipped with Electrolux's innovative Flame Control technology, which provides consistent heat levels and minimizes flare-ups. This feature is particularly useful for home chefs who require exact temperature precision. The EHG 680's burners deliver a powerful output, with the largest burner capable of generating up to 4.5 kW of heat, perfect for high-intensity cooking.

Safety is paramount in any kitchen, and the Electrolux EHG 680 does not disappoint. It includes a flame failure safety device that automatically cuts off the gas supply if the flame is extinguished, providing peace of mind while cooking. Furthermore, the durable cast iron trivets support heavy pots and pans while allowing for excellent heat distribution.

Another innovative feature of the EHG 680 is the integrated ignition system, which ensures easy and reliable lighting of each burner without the need for matchsticks or lighters. By turning the knob, users can effortlessly ignite the burners while adjusting the heat settings for maximum convenience.

The elegant design of the Electrolux EHG 680 makes it a perfect fit for any contemporary kitchen. Its minimalist profile seamlessly blends with various kitchen styles, making it a versatile choice for homeowners looking to integrate functionality and sophistication into their cooking spaces.

In summary, the Electrolux EHG 680 gas cooktop stands out with its combination of powerful burners, advanced technologies, and user-friendly design. With features like Flame Control, a safety shut-off system, and a stylish stainless-steel finish, this cooktop is ideal for anyone who values performance and aesthetics in their culinary endeavors.

Electrolux EHG 680 Electrical connections, Fitting the Hob into the worktop, Permanent Connection

Models: EHG 680