Electrolux EI23BC51IS, EI23BC51IW manual Installing Door Handles, Door Handle Mounting Instructions

12Installing Door Handles

Door Handle

Mounting

Instructions

1 Remove handles from protective packaging.

2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door.

3 While holding handle firmly against door, fasten upper and lower Allen set screws

(C) with supplied Allen wrench.

4 Repeat steps 2 and 3 to

install opposite handle.

Ensure the holes for theMounting Refrigerator Handles

set screws are facing towards the first door.

5 Position freezer handle end caps over left and right pre- installed shoulder bolts that are fastened to the drawer, ensuring the holes for

the set screws are facing down.

6 While holding handle firmly against drawer, fasten left

and right Allen set screws

(C) with supplied Allen

wrench.

Mounting Freezer Handle

NOTE

To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.