Electrolux EI23BC51IS, EI23BC51IW manual Electrical information

Models: EI23BC51IW EI23BC51IS

1 32
Download 32 pages 41.58 Kb
Page 4
Image 4

4Safety

Electrical information

WARNING

You must follow these guidelines to ensure that your refrigerator’s safety mechanisms are operating correctly.

The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz, AC-only non-GFCI electric outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician.

Do not use an extension cord or adapter plug.

If the power cord is damaged, it should be replaced by the manufacturer, service technician, or a qualified person.

Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle to prevent damaging the power cord.

To avoid electrical shock, unplug the refrigerator before cleaning and before replacing a light bulb or LED light.

Performance may be affected if the voltage varies by 10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty.

Do not plug the unit into an outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally.

IMPORTANT

To turn off power to your refrigerator, unplug the power cord from the wall outlet.

Page 4
Image 4
Electrolux EI23BC51IS, EI23BC51IW manual Electrical information